Products

Name Type of oil Solid content Oil length Viscosity Solvent Properties
CATALYST 806 n.a. n.a. n.a. n.a. -- High reactive tertiary amine, well suited to cure polyurethane formulations based on the ASKOCOAT technology, high flash point, low volatility EN request further information
CATALYST 704 n.a. n.a. n.a. n.a. -- Tertiary amine, well suited to cure polyurethane formulations based on the ASKOCOAT technology EN request further information
ASKOCOAT 420 n.a. n.a. n.a. 1.0 – 2.0 Pa.s -- Polyol component, excellent adjustable release properties, good mechanical properties EN request further information
ASKOCOAT 420 n.a. n.a. n.a. 1.0 – 2.0 Pa.s -- Polyol component, excellent adjustable release properties, good mechanical properties EN request further information
ASKOCOAT 500 n.a. n.a. n.a. 150 - 300 mPa.s -- Isocyanate component, excellent adjustable release properties, good mechanical properties EN request further information
ASKOCOAT 520 n.a. n.a. n.a. 150 - 300 mPa.s -- Isocyanate component, excellent adjustable release properties, good mechanical properties EN request further information
ASKODRY 2210 n.a. 32 – 37 % n.a. -- -- 6 % cobalt, easy to emulsify in water, good drying stability EN Order sample
ASKODRY 2216 n.a. 42 – 47 % n.a. -- -- 12 % zirconium, easy to emulsify in water, good drying stability EN Order sample
ASKOFEN 295E60 n.a. 58 - 62 % n.a. 90 – 160 mPa.s ethanol Used to manufacture friction pads, excellent penetration behavior, unlimited dilutable with ethanol EN Order sample
ASKOFEN 779W50 n.a. 48 - 52 % n.a. 40 - 100 mPa.s -- Used to formulate RFL (Resorcinol–Formaldehyde–Latex) in combination with Latex like SB or preferably with styrene, butadiene, vinylpyridine latex. EN Order sample
ASKOFEN R9500 n.a. 40 – 42 % n.a. 60 – 90 mPa.s n-butanol good compatibility to different resin systems, excellent chemical resistance EN Order sample
ASKOFEN R9600 n.a. 46 - 50 % n.a. 50 - 90 mPa.s n-butanol low formaldehyde content of less than 0.5%, coatings with a formaldehyde content of less than 0.1% can be formulated EN Order sample
BIOLIN 100 Soy bean oil 100 % ca. 50 % 8-11 Pas -- -- EN Order sample
EMULGATOR 5240 n.a. paste n.a. -- -- designed to emulsify long oil alkyds in water EN Order sample
GP 8900 n.a. 60.5 – 63.5 % n.a. -- ethanol excellent chemical and heat resistance, good flame resistance, low smoke density EN Order sample
GP BKS 2600 n.a. 52 – 56 % n.a. -- ethanol excellent chemical resistance, short baking times can be used as sole binder for interior protective coatings for drums EN Order sample
GP BKS 2610 n.a. 47 - 52 % n.a. -- n-butanol excellent chemical resistance, short baking times can be used as sole binder for interior protective coatings for drums EN Order sample
GP BKS 2620 n.a. solid, lumps n.a. -- -- excellent chemical resistance, excellent substrate wetting, very good intercoat adhesion to vinyl organosols EN Order sample
GP CK 2400 n.a. solid, flake n.a. -- -- improves chemicals resistance, leveling, hardness, wetting as well as intercoat adhesion EN Order sample
NECOLIN 3100 fish oil 79 – 81 % 80 % -- -- excellent wetting and penetration properties on different substrates, provides outstanding impregnation properties in wood coatings, improves adhesion and stabilizes residual rust on rusty surfaces EN Order sample

1 to 3 of 3 pages