Products

Name Type of oil Solid content Oillength pH value OH content Solvent Viscosity Properties
ASKOCOAT 420 / 500 n.a. n.a. n.a. n.a. n.a. 1.0 – 2.0 Pa.s Polyol component, excellent adjustable release properties, good mechanical properties ASKOCOAT_420_500_EN_JK.pdf request further information
ASKOCOAT 420 / 520 n.a. n.a. n.a. n.a. n.a. 1.0 – 2.0 Pa.s Polyol component, excellent adjustable release properties, good mechanical properties EN request further information
ASKODRY 2210 n.a. 32 – 37 % n.a. n.a. n.a. 6 % cobalt, easy to emulsify in water, good drying stability EN Order sample
ASKODRY 2216 n.a. 42 – 47 % n.a. n.a. n.a. 12 % zirconium, easy to emulsify in water, good drying stability EN Order sample
ASKOFEN 295E60 n.a. 58 - 62 % n.a. 8-9 ethanol 90 – 160 mPa.s Used to manufacture friction pads, excellent penetration behavior, unlimited dilutable with ethanol ASKOFEN_295_E_60_EN.pdf Order sample
ASKOFEN 779W50 n.a. 48 - 52 % n.a. 1-4 n.a. 40 - 100 mPa.s Used to formulate RFL (Resorcinol–Formaldehyde–Latex) in combination with Latex like SB or preferably with styrene, butadiene, vinylpyridine latex ASKOFEN_779_W_50_EN.pdf Order sample
ASKOFEN R9500 n.a. 40 – 42 % n.a. n.a. n.a. n-butanol 60 – 90 mPa.s good compatibility to different resin systems, excellent chemical resistance ASKOFEN_R_9500_EN.pdf Order sample
ASKOFEN R9600 n.a. 46 - 50 % n.a. n.a. n.a. n-butanol 50 - 90 mPa.s low formaldehyde content of less than 0.5%, coatings with a formaldehyde content of less than 0.1% can be formulated ASKOFEN_R_9600_EN.pdf Order sample
BIOLIN 100 Linseed oil 100% ca. 50 % 8-11 Pas PI_BIOLIN_100_EN.pdf Order sample
CATALYST 704 n.a. n.a. n.a. n.a. n.a. n.a. tertiary amine, well suited to cure polyurethane formulations based on the ASKOCOAT technology KATALYSATOR_704_EN_Revised_Specialties_13042018.pdf request further information
CATALYST 806 n.a. n.a. n.a. n.a. n.a. n.a. high reactive tertiary amine, well suited to cure polyurethane formulations based on the ASKOCOAT technology, high flash point, low volatility KATALYSATOR_806_EN_Revised_Specialties_13042018.pdf request further information
EMULGATOR 5420 n.a. paste n.a. n.a. n.a. designed to emulsify long oil alkyds in water EMULGATOR_5240_EN.pdf Order sample
GP 8900 n.a. 60.5 – 63.5 % n.a. n.a. n.a. ethanol excellent chemical and heat resistance, good flame resistance, low smoke density GP_PHENOLIC_RESIN_8900_EN.pdf Order sample
GP BKS 2600 n.a. 52 – 56 % n.a. n.a. n.a. ethanol excellent chemical resistance, short baking times, can be used as sole binder for interior protective coatings for drums GP_PHENOLIC_RESIN_BKS_2600_EN.pdf Order sample
GP BKS 2610 n.a. 47 - 52 % n.a. n.a. n.a. n-butanol excellent chemical resistance, short baking times, can be used as sole binder for interior protective coatings for drums GP_PHENOLIC_RESIN_BKS_2610_EN.pdf Order sample
GP CK 2400 n.a. flake n.a. n.a. n.a. improves chemicals resistance, leveling, hardness, wetting as well as intercoat adhesion GP_PHENOLIC_RESIN_CK_2400_EN.pdf Order sample
NECOLIN 3100 fish oil 79 – 81 % 80% n.a. n.a. excellent wetting and penetration properties on different substrates, provides outstanding impregnation properties in wood coatings, improves adhesion and stabilizes residual rust on rusty surfaces NECOLIN_3100_EN.pdf Order sample
NECOLIN F2080 fish oil 79 – 81 % 80% n.a. n.a. offers good water and akali resistance, improves the adhesion to metal, especially to slightly rusted surfaces NECOLIN_F_2080_EN.pdf Order sample
NECOLIN F2080SB fish oil 79 – 81 % 80% n.a. n.a. offers good water and akali resistance, improves the adhesion to metal, especially to slightly rusted surfaces NECOLIN_F_2080_SB_EN.pdf Order sample
NECOLIN FL2000 linseed / fish oil 98 – 100 % 80% n.a. n.a. excellent penetration and wetting properties NECOLIN_FL_2000_EN.pdf Order sample

1 to 3 of 3 pages